To repair stuccoed masonry as needed to match existing on second-story of both royal & toulouse elevations using the following vcc approved mortar & stucco formula:mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. 2016. 04. 05 - permit not picked up.

Replace and paint shutters, paint gallery railing, paint exterior stucco.

Proposal to remove ornamental outriggers and install new angled struts under existing balcony to reinforce balcony and remove sag.

This is a renewal of vcc permit #11-0535to do the following work as necessary: remove deteriorated floor boards, stringers, and fascia boards install new 3"x4" beaded stringers, 5/4x4 s2s t&g floorboards, and 7/8" fascia with " bead, all as per vcc standard detail sheet no. 18 (attached) all repair/replacement work shall match existing in color, size, material, detail, profile and exposure prime & paint to match existing color (off-white)

Repair masonry cracks as needed with vcc approved mortar/stucco mix, using 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix repair ground floor millwork including faade vitrine, to match existing conditions repair/replace as necessary doors & shutters on the 2nd & 3rd floors street elevations, with the removal of the existing plywood in the openings which is currently in the windows/doors of both floors will be removed all repair work shall match existing in color, size, material, detail, profile and exposure to prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minor millwork and/or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cement content not to exceed 1 part to 12); and to paint as follows to match existing:o wallsbay gray, flat or satin finisho wooden elements including doors, windows, frames, fascia/soffit of gallerywhite, semigloss

Renewal of permit # 13-09412 to perform the following work: repair masonry cracks as needed with vcc approved mortar/stucco mix, using 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix repair ground floor millwork including faade vitrine, to match existing conditions repair/replace as necessary doors & shutters on the 2nd & 3rd floors street elevations, with the removal of the existing plywood in the openings which is currently in the windows/doors of both floors will be removed all repair work shall match existing in color, size, material, detail, profile and exposure to prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minor millwork and/or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cement content not to exceed 1 part to 12); and to paint as follows to match existing:o wallsbay gray, flat or satin finisho wooden elements including door

Repair masonry cracks as needed with vcc approved mortar stucco mix, using 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix repair ground floor millwork including faade vitrine, to match existing conditions repair replace as necessary doors & shutters on the 2nd & 3rd floors street elevations, with the removal of the existing plywood in the openings which is currently in the windows doors of both floors will be removed all repair work shall match existing in color, size, material, detail, profile and exposure to prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minor millwork and or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cement content not to exceed 1 part to 12); and to paint as follows to match existing:o wallsbay gray, flat or satin finisho wooden elements including doors, windows, frames, fascia soffit of gallerywhite, semigloss

To repair stuccoed masonry as needed to match existing on second-story of both royal & toulouse elevations using the following vcc approved mortar & stucco formula:mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1 4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. 2016. 04. 05 - permit not picked up.

Renewal of permit # 13-09412 to perform the following work: repair masonry cracks as needed with vcc approved mortar stucco mix, using 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix repair ground floor millwork including faade vitrine, to match existing conditions repair replace as necessary doors & shutters on the 2nd & 3rd floors street elevations, with the removal of the existing plywood in the openings which is currently in the windows doors of both floors will be removed all repair work shall match existing in color, size, material, detail, profile and exposure to prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minor millwork and or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cement content not to exceed 1 part to 12); and to paint as follows to match existing:o wallsbay gray, flat or satin finisho wooden elements including door

This is a renewal of vcc permit #11-0535to do the following work as necessary: remove deteriorated floor boards, stringers, and fascia boards install new 3"x4" beaded stringers, 5 4x4 s2s t&g floorboards, and 7 8" fascia with " bead, all as per vcc standard detail sheet no. 18 (attached) all repair replacement work shall match existing in color, size, material, detail, profile and exposure prime & paint to match existing color (off-white)